Home > Exhibition > Content

Selection and use of aluminum single width mobile tower.

Mar 26, 2018

Aluminum single width mobile tower is a new type of composite aluminum scaffold, which has been widely used in the construction, decoration and all kinds of high-altitude work in various construction projects. The structure design of aluminum alloy single width tower frame is more flexible, and it is easy to install, safe and reliable, and better meet the requirements of engineering construction.

It should be noted that in practical application, we also need to take into account the operating environment and usage requirements of the site. First of all, Aluminum single width mobile tower can be used for limited space, such as narrow sidewalks and corridors. At the same time, the production quality of the product also needs to meet the relevant standards. It provides users with similar stability and component utilization benefits.

In addition, the Aluminum single width mobile tower has enough strength to satisfy the construction site environment, and is easy to carry. When we use the product, we also need to comply with local, regional and national regulations. At the same time, we should also take into account the safety issues and make sure the operation is reasonable. During operation, the operation should be performed according to the requirements and the contents of all aspects should be observed.

As a user, we must pay attention to these three questions: 1. The use of Aluminum single width mobile tower shall comply with the safety provisions; 2. Confirm whether the tower is certified, installed and used in accordance with the requirements; 3. Comply with the contract operation instructions.

In general, all parts of the Aluminum single width mobile tower are made of special aluminum alloy, which is 75% lighter than the conventional steel frame. Moreover, the component connection strength of the Aluminum single width mobile tower frame is high, and the new cooling process of internal expansion pressure is adopted. The damage of the joint can reach 4100 to 4400Kg, which is much larger than the allowable tensile strength of 2100Kg.

 

 

http://www.aluscaffold.com/