Home > Exhibition > Content

Aluminum stairs ringlock scaffolding maximum support point and maintenance

Nov 02, 2018

Ladders for aluminum stairs ringlock scaffolding should be placed on a sturdy, stable floor that is not allowed to be placed on ice, snow or slippery surfaces without slip and fixtures. Aluminum ladder scaffolding is prohibited from exceeding the maximum weight bearing quality indicated during operation. It is forbidden to use ladders in strong winds.

The metal ladder of the aluminum ladder scaffold is conductive, avoiding being close to the charged place during use. When climbing, the person faces the ladder, grasps both hands, and keeps the center of gravity in the center of the two ladder columns. Do not stand within 1 meter from the top of the ladder during operation. On the inside steps, always keep a safety level of 1 meter, and don't climb the top support point at the top.

Aluminum stairs ringlock scaffolding should not exceed the top of the head during the operation, so as to avoid the body losing balance and danger, and to some extent, it is forbidden to directly cross from one side of the ladder to the other.

Maintenance of aluminum ladder scaffolding

1. Clean the ladder regularly to avoid certain chemicals eroding the surface of the ladder. Check the joints regularly and add lubricant if necessary.

2. If the ladder material is bent, broken or the connector does not work properly, be sure to contact the manufacturer for professional repair.

3. Poor environmental conditions will reduce the life of the ladder. In general, its service life is 2 years indoors and 1 year outdoor.